Page 50 of 64
Implementation and operation
553-2681-100 Standard 5.00 August 1996
CAS Remote
To configure CAS Remote, respond to the prompts in the following overlays:
LD 15 –
Add or change a CAS Remote for a customer.
Note 1:
When the CAS feature is defined, a signal Remote key is
assigned automatically to the key above LPK5 on all CAS Main
Attendant Consoles.
Note 2:
For the M1250 and M2250 Attendant Consoles, the C/H key
acts as the CAS key.
Prompt
Response
Description
REQ
NEW, CHG
Add, or change the CAS Main.
TYPE
CDB
CAS
Customer Data Block.
Release 21 gate opener.
CUST
xx
Customer Number.
ATDN
nnnn
DN that must be dialed by local telephones to reach the
CAS Main attendant (default is 0).
CAS
(NO)YES
(Do not) change CAS options.
MAIN
NO
This is a CAS Remote location.
DFLT
(NO)YES
System to recover in the active mode after sysload.
LDNT
(NO)YES
Special tone to be given to the CAS Main attendant on
presentation of LDN calls.
LADN
nnnn
Local attendant DN (must be different from the DN entered
for ATDN.)
RLA
nnn
Route number for the Release Link Remote trunks.
CHDN
nnnn
DN to be dialed by the CAS attendant to place a call on
silent hold.
HRCL
0-512
Time, in units of 2 seconds, that a call remains on silent hold
before being recalled to the attendant