Page 47 of 64
Centralized Attendant Service Description and engineering
60
Implementation and operation
Feature implementation
CAS Main
To configure CAS Main, respond to the prompts in the following overlays:
LD 15 –
Change a CAS Main for a customer.
Prompt
Response
Description
REQ
CHG
Change the CAS Main.
TYPE
CDB
ATT
Customer Data Block.
Release 21 gate opener.
CUST
xx
Customer Number.
ATDN
nnnn
DN that must be dialed by local telephones to reach the
CAS Main attendant (default is 0).
ICI
0-19 Rnnnn
Assign Release Link Main trunk routes to Incoming Call
Indicators, as required.
CAS
YES
CAS is enabled for this customer. For Release 21 and later,
CAS is the gate opener.
MAIN
YES
This is the CAS Main location.
ICI
0-19 Rnnnn
Assign Release Link Main trunk routes to Incoming Call
Indicators, as required.