Nortel RLC, Руководство по установке и администрированию

Страница: 200 / 466

174 RLC Installation and Administration Guide
Configuring the RLC Standard 4.0
RLC System Configuration field descriptions
Field Description
Unit ID The Unit ID is always set as 254. The remote units in a Remote
Gateway 9100 Series system must have Unit IDs unique among
all units connected to the same RLC.
Note: This Unit ID must also be entered on the RLC
Connection Configuration property sheet pertaining to each
remote unit. With this information, the system creates the
communication path between the remote unit and this RLC.
Node Name Enter a descriptive name for this RLC.
Voice Activity
Detection
„
Click on the Disable option button if you do not want the
RLC to stop sending voice packets across the network when
no one is speaking.
„
Click on the Enable option button if you want the RLC to
stop sending voice packets across the network when no one
is speaking.
The default is Enable.
Jitter Buffer Select the length of time, in milliseconds (ms), that you want
the RLC to collect unevenly arriving voice packets so that it can
relay them evenly. This action works to minimize audible jitter.
Valid options are 30, 60 and 90 ms.
The default is 90 ms.
Enable PBX Alarms Click on the Enable PBX Alarms check box if you want the
RLC to notify the host PBX to produce alarms and alerts. If you
don't want the RLC to notify the host PBX to produce alarms
and alerts, ensure that the Enable PBX Alarms check box is not
selected.
Refer to “Display Logs” in Configuration Manager online Help
to determine which alarms and alerts the PBX generates.