Page 1 of 66
DTI/CPI
Installation and data administration
2
Introduction
This document provides installation, data administration, and acceptance test
procedures for the Digital Trunk Interface and Computer-to-PBX Interface
(DTI/CPI) features.
These features are available on ST, STE, RT, MS, N, NT, XN, and XT
systems and on Meridian 1 system options 21, 21E, 51, 61, 71, and 81. The
DTI/CPI features are offered on the following X11 software releases:
— Release 5 and later software for N and XN systems
— Release 8 and later for M, NT, and XT systems
— Release 9 and later for ST systems
— Release 12 and later for RT systems
— Release 15 and later for system options 21, 21A, 51, 61, and 71
— Release 18 and later for system options 21E, STE, and 81
Note:
Throughout this document, Meridian 1 refers to all Meridian
systems unless otherwise noted.
The document includes the following sections:
—
DTI installation:
overview of DTI hardware, interfaces, and cable
requirements, including installation and removal procedures for DTI
cards, Echo Cancellers, and Clock Controllers.
—
Data administration:
procedures for provisioning the DTI feature and
the CPI feature.
—
Acceptance tests
: acceptance test procedures for the DTI feature.
—
Wire list
: information on building external cables of nonstandard lengths
for DTI interface applications.
