manualshive.com logo in svg

Nortel Passport 4430, Установка оборудования, Страница: 133 / 176

Поделиться
Скачать
Nortel Passport 4430 Скачать руководство пользователя страница 133

B-1

Regulatory and Telephone

Company Requirements

B

This chaper describes the Regulatory Requirements and Telephone Company 
Requirements necessary for connecting to a telephone network and operating 
your Passport 4400 unit (4430/4450/4455).

Regulatory Requirements

Notice of Electromagnetic Compatibility (EMC)

The following label certifies that, when installed in an approved chassis, the 
voice/fax module meets EMC Level A of the EN55022 Standard. This label is 
also affixed to the voice module.

In addition to the EMC Standard, this module meets and complies with the EN 
50082 Immunity Standard.

Safety Information

Before performing any of the procedures included in this chapter, read the safety 
information below.

Underwriters Laboratories, Inc. (UL), for North America, (TÜV) for Germany, 
and (C-UL) for France request that the following statements of warning be made 
in three languages to help in the safe operation of the unit.

Warning:

!

This is a Class A product. In a domestic environment, this product 

may cause radio interference, in which case the user may be 
required to take adequate measures.

Содержание Passport 4430

















































































































































































Отзывы:

Нет отзывов