Nortel Optical Multiservice Edge 6130, Руководство по планированию, Страница: 14 / 292

1-2 Introduction
Optical Multiservice Edge 6130 NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
The OME6130 provides dramatic cost savings over currently deployed
solutions and offers deployment flexibility at multiple levels, including:
• Service flexibility : Full mix of services including 10/100BT (Base-T)
Ethernet, Gigabit Ethernet, E1/DS1, E3/DS3 and STM-1o/e.
• Reach flexibility : Small Form-Factor Pluggable (SFPs) optics are used,
allowing each shelf to be configured for the distance and wavelength
required.
• Protection flexibility : Can be deployed with or without line protection.
Both 1+1 MSP and SNCP network protection protocols are supported.
• Interoperability flexibility : Can be networked either with other
OME6130 or OME6110 network elements, or subtended from other Nortel
optical products, such as OM4000 or OME6500.
• Management flexibility : The OME6130 is fully integrated into Nortel’s
Optical Application Platform with OMEA. The OME6130 can also be
managed from an HTTP web-based craft user interface running on the
network element. In addition, SNMP alarm traps are supported, enabling
OME6130 fault management from SNMP management systems.
• Data communications flexibility : The OME6130 can be managed over
either OSI or IP DCN networks. Path DCC capabilities are also provided
for extending management reach over third-party networks.
The OME6130 is a carrier grade platform that builds upon the solid reputation
for dependability of Nortel Networks' widely deployed optical networking
products. The various protection options offered by the OME6130 further
enhance the dependability of service transport. For access head end
applications, service traffic can either be connected via sub-network
connection protection (SNCP) or via protected point-to-point 1+1
connections.