Nortel OPTera Metro 1200, Руководство по установке

Страница: 9 / 22

9
Safety and environmental guidelines
Electrostatic discharge can damage the components on circuit
boards. When you unpack the converter module, take the
following precautions to prevent damage to the board:
• Do not remove the converter module from its antistatic
plastic bag until you are ready to install it. Store or ship the
converter module and components in antistatic packaging.
• Check the converter module for damage. If you find damage,
contact your sales or customer service representative at the
organization from which you purchased the equipment.
• Use proper grounding techniques when you install the
converter module. You can use a foot strap and grounded mat
or wear a grounded static discharge wrist strap.
Installing the converter module
You must have a previously installed BayStack 10 PSU and
200 watt RPS to use the converter module. Nortel Networks
recommends rack-mounting both the OPTera Metro 1200
Ethernet Service Module and the BayStack 10 PSU containing
the 200 watt RPS. You can also table mount the BayStack 10
PSU and stack the OPTera Metro 1200 Ethernet Service Module
on top. Do not stack the BayStack 10 PSU on top of any table-
mounted switches, hub, or routers.