Nortel OPTera Metro 1200, Руководство по установке

Страница: 13 / 22

13
4
Gently pull the converter module from the switch by pulling
on the two captive screws.
5 If you are installing a new converter module, follow the
instructions in
“Installing the converter module” on page 9 .
6
If you are not installing an converter module, retrieve the
blank plate that ships with the OPTera Metro 1200 Ethernet
Service Module.
7 Line up the locking tabs on the blank plate with the
receptacles in the converter module slot of the switch. Press
firmly, and fasten the screws using a Phillips screwdriver.
Refer to “Connecting the cable,” next, and “Connecting the
power supply cord” on page 15 to continue.
Connecting the cable
Note:
The -48 V converter module cable used with
this converter module is shipped with the 200 watt RPS,
which fits into the BayStack 10 PSU.
10559FA
Redundant P
ower