Nortel Norstar SMDR6, Руководство по установке

Страница: 12 / 16

4 SMDR6 Installation Guide
Setting the printer
Before you connect the printer, make sure the printer is set at:
1. speed: 1200 to 115200 bits per second
2. 8 bits per character
3. no parity
4. no XON, XOFF
5. 1 start bit
6. 1 stop bit
Note : The printer used for SMDR6 can be any RS-232 serial
compatible device such as a serial printer, PC with communication
software or call accounting package with the capability to collect data
from the serial port.
Connecting the
printer
To connect the printer:
1. Connect the cable to the RS-232 serial port of the printer.
2. Make sure that the KSU AC cord and printer are connected to a
power source.
Note : Make sure no stress is placed on any of the port connections.
9 Pin
Connector
25 Pin
Connector
Signal Name Direction
1 Not used
2 3 RX /data From SMDR6
3 2 TX Data To SMDR6
4 20 DTR To SMDR6
5 7 Signal Ground
6 6 DSR From SMDR6
7 Not used
8 5 CTS From SMDR6
9 Not used
888385_01 Install.book Page 4 Wednesday, November 11, 1998 2:45 PM