Nortel ICSRT Скачать руководство пользователя страница 113

Страница: 113 / 138

Chapter 8 Backing up and restoring Norstar data

113

ICS Remote Tools User Guide

Understanding the job queue

The Jobs in Queue screen lists all Norstar systems scheduled for a backup or restore. Each backup
or restore in the list is called a job.

To access the Jobs in Queue screen, either click on

Scheduler

, then select

Job Queue

or double

click on the Scheduler icon on the task bar.

Click on

Done

to exit the screen.

Figure 56

Jobs in Queue screen

Each job on the Job Queue is listed with its

Customer Name

System ID

Job Type

the

Date & Time

the job is scheduled to occur, and the current

Status

of the job.

The Jobs in Queue screen uses the following

Status

identifiers:

•

Ready to Run

: The job has been scheduled and is waiting to be run.

•

Running

: The job is currently being run.

•

Completed

: The Job has been completed successfully.

•

Error

: An error occurred during the job execution. Corresponding error message will be

updated.

•

Suspended

: Job was scheduled for execution but the user terminated the scheduler

application. The status of jobs that are to be scheduled are updated as

Suspended

in the

Status

field of the Jobs in Queue dialog.

Содержание ICSRT











































































































































Результаты поиска

Содержание ICSRT

Отзывы:

Nortel ICSRT, Руководство пользователя, Страница: 113 / 138

Результаты поиска

Содержание ICSRT

Отзывы: