manualshive.com logo in svg

Nortel ICS 4.0, Руководство пользователя

Поделиться
Скачать
Nortel ICS 4.0 Скачать руководство пользователя страница 88

76 / Transferring calls

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

If you have an auxiliary ringer programmed to ring for calls on 
an external line, and you transfer a call on that line without 
announcing the transfer, the auxiliary ringer rings for the 
transferred call.

Transferring external calls

If an external call is transferred to a busy telephone, or not 
answered after a few rings, the call automatically rings again 
at the telephone from which it was transferred, and the display 
indicates that the telephone was busy or that no one answered.

When transferring an external call to an external number, the 
external call you are trying to transfer must be an incoming 
call on a disconnect supervised line. 

While on a conference call, you can remove yourself from the 
conference and connect the other two callers using the 
Transfer feature. However, if both of the other people are from 
outside the system, at least one of the outside callers must have 
called you and both of the outside calls must be on disconnect 
supervision lines. 

Note:  Transfer via Hold on DID lines is not supported. Once 

a call is answered the line appearances on all other sets 
are free immediately to take other calls. This allows a 
greater number of calls to be received. Use the Call Park 
feature to transfer a call.

In certain situations, you may experience lower volume levels 
when transferring an external call to an external person, or 
when transferring two external callers from a conference call.

Canceling a transfer

You can reconnect to the person you are trying to transfer at 
any time before the transfer is complete.

1. Press 

ƒ£‡‚ or 

CANCL.

 

p0881591.book  Page 76  Wednesday, August 19, 1998  6:43 PM

Содержание ICS 4.0



















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды