manualshive.com logo in svg

Nortel ICS 4.0, Руководство пользователя

Поделиться
Скачать
Nortel ICS 4.0 Скачать руководство пользователя страница 170

158 / ISDN PRI and BRI

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

ISDN BRI

Modular ICS 4.0 supports a maximum of 30 ISDN sets on the 
system.

The following ISDN services are supported:

•

incoming calls

•

outgoing calls

•

Calling Line Identification Presentation

•

Sub-addressing

•

bearer capabilities

•

teleservices

The Call Forward All Calls feature can be used from ISDN 
terminals connected to Modular ICS.

Note:  Norstar sets can accept voice calls only. Video and data 

calls do not alert at a Norstar set.

Although an ISDN S-loop or LT-loop can support up to eight 
devices, the loop has a limit of two B-channels. If both B-
channels are in use, other devices on that loop cannot make or 
receive calls until a B-channel is available, or until both B-
channels are available in the case of a video terminal. Thus, the 
number of terminals installed must take into account whether 
you require dedicated access for the terminals on that loop.

Note:  Norstar set features, other than Transfer and Call 

Forward All Calls, are not available to ISDN terminals. 
In addition, you cannot retrieve a parked call, or reach 
a Direct-Dial set by using the Direct-Dial digit from an 
ISDN terminal.

p0881591.book  Page 158  Wednesday, August 19, 1998  6:43 PM

Содержание ICS 4.0



















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды