manualshive.com logo in svg

Nortel ICS 4.0, Руководство пользователя

Поделиться
Скачать
Nortel ICS 4.0 Скачать руководство пользователя страница 116

104 / Communicating in the office

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

Using Voice Call

ƒflfl

You can make an announcement or begin a conversation 
through the speaker of another telephone in the system.

Making a Voice Call

Press 

ƒflfl.

You have one or more messages and one or 
more new Call Logs. Press 

ƒ°‚fl

 to change the first line of 

the display to the current time and date.

You have no line button free with which to 
reply to a message.

There has been no number programmed for 
the voice message center. Contact your 
voice messaging service provider.

You are at the beginning of your list of 
messages. Press 

NEXT

 to move through your 

messages.

You are trying to send a message to a user 
whose message waiting list is full.

You have tried to send a message but your 
telephone’s list of sent messages is full. 
Cancel one of the messages you have sent, 
if possible, or wait until you have received a 
reply to one of those messages.

For other displays, see “Common feature displays” on page 203.

Tip - 

Hunt Groups cannot accept voice calls. Answer 

buttons have no appearances for voice calls, and the set 
does not ring for voice calls. For more information on Hunt 
Groups see “Programming Hunt Groups” on page 135. 
For more information on Answer buttons see “Answer 
buttons” on page 40.

Messages & Calls
MSG

CALLS

No button free

No number stored

Start of list
NEXT

Their list full

Your list full

p0881591.book  Page 104  Wednesday, August 19, 1998  6:43 PM

Содержание ICS 4.0



















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды