Nortel Contivity 100, Настройка

Страница: 19 / 78

19
Setting Up the Contivity 100 Unit
Preface
This manual describes the Contivity* 100 unit and what you do to install the
Contivity 100 unit hardware.
Before you begin
Before using this manual, you need to do two things. First, write down the model
number and serial number of your Contivity 100 unit. You will need this
information if you call Nortel Networks* Technical Support. Model and serial
numbers are located on the rear panel of your unit.
Model # ____________________________________________________
Example: DM1401E67
Serial # ____________________________________________________
Example: I500E07BF224BB
Second, you must obtain Internet access from an Internet service provider (ISP).
For details, refer to Installing the Contivity Branch Access Management Software
Version 7.20.
Warning:
To avoid bodily injury from hazardous electrical shock, never
open the Contivity 100 unit. There are no user-serviceable components
inside.
Note:
Do not apply power to the unit until you have completed the
installation steps in Chapter 2, “Contivity 100 unit hardware installation,”
on page 35 .