Nortel Compact ICS 7.1, Руководство координатора

Страница: 66 / 266

66 / Answering calls
Compact ICS 7.1 System Coordinator Guide N0130955 01
Changing handsfree for a telephone
You can program the type of handsfree used with each telephone.
1. Place the programming overlay over the appropriate buttons on your
two-line-display telephone.
2. Press
≤••¤flfl‹››
.
3. Press
¤‹fl›fl
(the default System Coordinator password).
4. Press
≠
and enter the internal number of the telephone you
want to program.
5. Press
≠
twice.
6. Press
‘
three times.
7. Choose a setting at
Handsfree:
using the
CHANGE
button.
There are three ways to set handsfree for an individual telephone:
Both Auto and standard handsfree allow you to use a headset with a system
digital phone.
A handsfree/mute button is automatically assigned to a legacy Norstar
telephone that is programmed with handsfree and is always located in the
lower right-hand corner of the numeric dialpad. For 7208 and 7316 digital
Handsfree is not available to the telephone.
You can make or answer a call without having to
pick up the handset or press the button labeled
handsfree/mute. The internal microphone and
speaker of the telephone turn on automatically
when you press a line or intercom button to make
or answer a call.
A standard version of handsfree described ‘‘Using
handsfree/mute’’ on page 62. Not available for
7316E digital phones.
This prompt appears if you attempt to use
handsfree or headset and the telephone not been
configured with
Auto
under
Handsfree
.
For other displays, see ‘‘Common feature displays’’ on page 243.
Handsfree:None
CHANGE
Handsfree:Auto
CHANGE
Handsfree:Std
CHANGE
Need Handsfree