Nortel Compact ICS 7.1, Руководство координатора

Страница: 212 / 266

212 / Using System features
Compact ICS 7.1 System Coordinator Guide N0130955 01
alternate routes are offered only in the case where the original route
is not available. Refer to the section on least-cost routing in the
Compact ICS Installer Guide .
Turning Services on and off
The master control for how different services and their schedules are used
by your system is in programming. There are three settings:
Manual
,
Automatic
and
Off
.
• Manual allows you to turn the service on and off at any time from a
control telephone using a feature code.
• Automatic allows you to use the preassigned stop and start time for a
service. You are able to start and stop the service by entering the
appropriate feature code at a control telephone. If you select this
setting, you use the start and stop times programmed by your installer
or customer service representative.
• Off prevents the service from being activated.
1. Place the programming template over the appropriate buttons of the
programming telephone.
2. Press
≤••¤flfl‹››
.
3. Press
¤‹fl›fl
(the default System Coordinator password).
4. Press
‘
twice.
5. Press
≠
at
Services
.
6. Press
‘
until you see the Service you want to program.
7. Press
≠
and
‘
until you see the schedule you want
to program.
8. Press
≠
and use
CHANGE
to select the setting that works best
for your office:
Off
,
Manual
or
Automatic
.
Each schedule can have its own configuration of a Service which works
independently of automatic start and stop times. For example, there may be
a version of Restriction service called Night Schedule that prevents anyone
from making long distance calls. But calling it Night Schedule does not
mean it can only be used with a schedule. You can turn the Night Schedule
for Restriction Service on or off, as needed, any time of the day or night. If