Nortel CallPilot 1005r, Установка оборудования

Страница: 48 / 74

Installing the server and peripheral devices Standard 1.06
48 CallPilot
To connect the mouse, keyboard, and monitor to
the server
1 Place the monitor, keyboard, and mouse in the same location as
the server.
2 Plug the keyboard and mouse cables into the PS/2 connectors on
the rear panel (see
“Rear panel connectors” on page 47 ).
3 Plug the monitor into the video connector on the rear panel. Tighten
the screws on the connector.
4 Ensure that a single-point ground reference is available for all the
power outlets serving the CallPilot server and its peripherals. Before
the CallPilot server installation, a qualified electrician must
implement the single-point ground reference requirement between
the power outlets of the CallPilot server and the power outlets of the
switch.
5 Connect the power cord to the monitor and plug the other end into a
wall receptacle or power bar.
6 Turn on the monitor.
To connect the modem to the server
1 Connect one end of the telephone cable to the modem RJ-11 jack
labeled LINE.
2 Connect the other end of the telephone cable to the RJ-11 jack in
the wall.
F PS/2 Mouse and Keyboard
connectors M Server management LAN
port
G Rear comm 2 serial port
connector N External SCSI tape drive
connector
Label Control or feature Label Control or feature