Nortel CallPilot 1005r, Установка оборудования

Страница: 31 / 74

December 2006 1005r server description
1005r Server Hardware Installation 31
Supported peripheral devices
Introduction
This section identifies external devices that are supported by the 1005r
server.
Device Description
Modem Use a 56-Kb/s external modem to provide remote access
to the 1005r server. The modem connects to one of the
USB connectors on the rear of the server.
You cannot use a serial port modem.
Ethernet hub A 10Base-T Ethernet hub provides the ELAN Subnet
connection between the 1005r server and the Meridian 1
switch or Succession 1000 system. The customer can
supply a hub or switch from third-party vendors or from
Nortel.
Since the hub is an external device, it requires an AC
power source.
ATTENTION
To comply with EMC radiation requirements, a Class A
hub must be located 10 m (33 ft) away from the 1005r
server. Shielded Ethernet cables must be used.
Monitor, keyboard,
and mouse
„
VGA Monitor with Male DB-15 connector (customer
supplied)
Since the monitor is an external device, it requires its
own AC power source.
„
Keyboard: (customer supplied)
„
Mouse: (customer supplied)