manualshive.com logo in svg

Nortel CallPilot 100, Руководство по установке и эксплуатации

Поделиться
Скачать
Nortel CallPilot 100 Скачать руководство пользователя страница 23

23

CallPilot Message Networking Set Up and Operation Guide

Chapter 3
Setting up AMIS

Setting up AMIS

AMIS provides your site with network voice messaging features. This chapter describes how to set 
up and test AMIS on your Business Communications Manager or CallPilot 100/150 system.

AMIS networking properties

AMIS networking properties are:

Note: 

Make sure that your Company Greetings are 15 seconds or longer. For how to 

record Company Greetings refer to the 

CallPilot Manager Set Up and Operation Guide

.

AMIS Networking properties are not available if you have a CallPilot 100 that is 
connected to a Compact 3X8 ICS.

International Access code

This code identifies the country where your site is. This code allows 
international calling capability. In Canada and the United States, the 
International Access code is 011. This number can have a maximum of four 
digits.

Country code

This code is assigned to the country where your site is located. In Canada 
and the United States, the Country code is 1. This code can have a 
maximum of four digits. This information is used to generate the return 
address of your location.

Area code

This code is assigned to your calling area. For example, the area code for 
Kansas City is 816 and the area code for Calgary is 403. Each province, 
state, and, sometimes city has a specific area code. This number can have 
a maximum of six digits. This information is used to generate the return 
address of your location.

Telephone number

The system telephone number at your site is the number assigned to the 
Auto Attendant. This number can have a maximum of 16 digits. This 
information is used to generate the return address of your location.

Outdial route

The numbers your site uses to access Line, Pool or Route codes. The 
Outdial route is the Line or Pool number that AMIS uses to make an 
outgoing call or the Route code used to call a specific site.

Enable Loopback mailbox

You use a Loopback Mailbox to test if two sites are communicating. When 
a Loopback mailbox receives a message, it sends it back to the originating 
mailbox. Before you can test network message capability, you must enable 
the Loopback Mailbox.

The Loopback mailbox is not enabled by default. Enable the Loopback 
mailbox while you set up and test your network. Disable the Loopback 
mailbox after you know that it is working.

Содержание CallPilot 100



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды