manualshive.com logo in svg

Nortel BSR222, Конфигурация, Страница: 439 / 451

Поделиться
Скачать
Nortel BSR222 Скачать руководство пользователя страница 439

Appendix B Log Descriptions

439

Nortel Business Secure Router 222 Configuration — Basics

Failed to resolve 

<CMP CA server url>

The CMP online certificate enrollment failed because the 
certification authority server’s IP address cannot be resolved.

Rcvd ca cert: 

<subject name>

The router received a certification authority certificate, with 
subject name as recorded, from the LDAP server whose IP 
address and port are recorded in the Source field.

Rcvd user cert: 

<subject name>

The router received a user certificate, with subject name as 
recorded, from the LDAP server whose IP address and port 
are recorded in the Source field.

Rcvd CRL <size>: 

<issuer name>

The router received a CRL (Certificate Revocation List), with 
size and issuer name as recorded, from the LDAP server 
whose IP address and port are recorded in the Source field.

Rcvd ARL <size>: 

<issuer name>

The router received an ARL (Authority Revocation List), with 
size and issuer name as recorded, from the LDAP server 
whose address and port are recorded in the Source field.

Failed to decode 

the received ca 

cert

The router received a corrupted certification authority 
certificate from the LDAP server whose address and port are 
recorded in the Source field.

Failed to decode 

the received user 

cert

The router received a corrupted user certificate from the 
LDAP server whose address and port are recorded in the 
Source field.

Failed to decode 

the received CRL

The router received a corrupted CRL (Certificate Revocation 
List) from the LDAP server whose address and port are 
recorded in the Source field.

Failed to decode 

the received ARL

The router received a corrupted ARL (Authority Revocation 
List) from the LDAP server whose address and port are 
recorded in the Source field.

Rcvd data <size> 

too large! Max size 

allowed: <max size>

The router received directory data that was too large (the size 
is listed) from the LDAP server whose address and port are 
recorded in the Source field. The maximum size of directory 
data that the router allows is also recorded.

Cert trusted: 

<subject name>

The router has verified the path of the certificate with the 
listed subject name.

Due to <reason 

codes>, cert not 

trusted: <subject 

name>

Due to the reasons listed, the certificate with the listed subject 
name did not pass the path verification. The recorded reason 
codes are only approximate reasons for not trusting the 
certificate. See 

Table 137

 for the corresponding descriptions 

of the codes.

Table 136   

PKI Logs

Log Message

Description

Содержание BSR222




































































































































































































































































































































































































































































Отзывы:

Нет отзывов