Nortel BSR222 Скачать руководство пользователя страница 266

Страница: 266 / 451

266

Chapter 14 Certificates

NN47922-500

Certificate file formats

The certification authority certificate that you want to import has to be in one of
these file formats:

•

Binary X.509: This is an ITU-T recommendation that defines the formats for
X.509 certificates.

•

PEM (Base-64) encoded X.509: This Privacy Enhanced Mail format uses 64
ASCII characters to convert a binary X.509 certificate into a printable form.

Modify

Click the details icon to open a screen with an in-depth list of
information about the certificate.

Click the delete icon to remove the certificate. A window displays,
asking you to confirm that you want to delete the certificate.

You cannot delete a certificate that one or more features are configured
to use.

Do the following to delete a certificate that shows

*SELF

in the

Type

field.

1. Make sure that no other features, such as HTTPS, VPN, or SSH are
configured to use the

*SELF

certificate.

2. Click the details icon next to another self-signed certificate (see the
description on the

Create

button if you need to create a self-signed

certificate).

3. Select the

Default self-signed certificate which signs the

imported remote host certificates

check box.

4. Click

Apply

to save the changes and return to the

My Certificates

screen.

5. The certificate that originally showed

*SELF

displays

SELF

and you

can delete it now.

Note that subsequent certificates move up by one when you take this
action.

Import

Click

Import

to open a screen where you can save the certificate that

you have enrolled from a certification authority from your computer to
the Business Secure Router.

Create

Click

Create

to go to the screen where you can have the Business

Secure Router generate a certificate or a certification request.

Refresh

Click

Refresh

to display the current validity status of the certificates.

Table 66

My Certificates

Label

Description

Содержание BSR222




































































































































































































































































































































































































































































Результаты поиска

Содержание BSR222

Отзывы:

Nortel BSR222, Конфигурация, Страница: 266 / 451

Результаты поиска

Содержание BSR222

Отзывы: