Chapter 2 Entering keycodes on the BCM system
13
Keycode Installation Guide
Loading a keycode using Network Configuration Manager
Network Configuration Manager (NCM) is an optional management application that provides
centralized configuration and system management capabilities for a multi-BCM network. You can
use NCM to distribute keycode files to many BCM devices on a scheduled, handsfree basis, by
using the NCM Keycode Wizard. For more information, refer to NCM documentation
.
Loading a keycode using the Startup Profile
You can use the Startup Profile to program the initial configuration parameters of the BCM. The
keycode file for the system is included in the Startup Profile. You do not require Element Manager
or the telset administration interface to enter a keycode using the Startup Profile.
The keycode file and the Startup Profile must both be on the USB storage device used to load the
Startup Profile onto the BCM. The Startup Profile must include a line that instructs the BCM to
look on the USB storage device for the keycode file specific to that BCM. Refer to your hardware
installation and configuration guide for this procedure.
18.Press
CHNGE
to enter the second set of eight digits of the keycode
19.Enter the second set of eight digits of the keycode, and press
OK
.
20.Press
CHNGE
to enter the third set of eight digits of the keycode, and
press
OK
.
21.Enter the third set of eight digits of the keycode, and press
OK
.
22.The first eight digits display. Press
BACK
to continue.
23.Keycode displays. Press
BACK
to continue.
24.Activate? displays. Press
YES
to activate the features.
25.Activated displays.
Warning:
You must reboot your BCM system if a dialog box prompts you to do
so.
2nd:
NEXT CHNGE BACK
2nd:
CANCL RETRY OK
3rd:
NEXT CHNGE BACK
3rd:
CANCL RETRY OK
1st:12345678
NEXT CHNGE BACK
Keycode
NEXT SHOW BACK
Activate?
YES NO
Activated
