10
Chapter 2 Entering keycodes on the BCM system
NN40010-301
NN40010-301
Manually adding a keycode using Element Manager
If you do not have a keycode file saved to your computer that uploads automatically, you can enter
the keycode file information manually. For example, you can enter keycode information that your
distributor faxes to you.
You need the information from the keycode file to complete this procedure. You must have the:
•
sequence number
•
list of features and data values
•
expiry date of Try ‘N Buy feature (if applicable)
•
24-digit keycode
To manually add a keycode file
1
Log on to Element Manager and select the BCM you want to access.
1
For information about how to log on to Element Manager, refer to your administration guide.
2
On the
Task Navigation
Panel
, select the
Configuration
tab.
The Configuration folders appear.
3
Select the
System
folder and then click the
Keycodes
task.
The Keycodes panel appears.
4
Click
Modify Feature Licences Table
.
The Modify Features Licences Table window appears.
5
In the
Modify Features Licences Table
box, verify that the sequence number in the
Sequence #
box is identical to the sequence number in the new keycode file.
6
In the
Feature Licences
table, select the feature you want to modify, and click the number in
the
Data
column.
7
Modify the data feature value to ensure it is identical to the value in the new keycode file.
8
Click a feature name to allow the data you entered to be accepted.
Note:
The sequence number increases by one each time you obtain a new
keycode file. Element Manager should automatically increase the sequence
number.
Note:
If the sequence numbers do not match, manually correct the number so it is
identical to the sequence number in the new keycode file.
