Nortel BayStack 380-24F, Начало работы

Страница: 41 / 76

Chapter 3 Device Manager basics 41
Getting Started with the BayStack 380-24F Gigabit Switch Management Software
Figure 19 Properties dialog box
2 Type information and select check boxes.
3 Click OK.
Table 2 describes items in the Properties dialog box.
Table 2 Properties dialog box items
Area Item Description
Polling Status Interval Interval at which statistics and status information are gathered (default is
300 seconds).
(If traps, Status
Interval) Interval at which statistics and status information are gathered when traps
are enabled (default is 300 seconds).
Hotswap Detect
every The interval at which Device Manager polls for module information
(default is 600 seconds).
Enable Enables (checked) or disables (not checked) periodic polling of the device
for updated status. If polling is disabled, the switch status is updated only
when you click Refresh in the chassis window.