Nortel BayStack 380-24F, Начало работы

Страница: 30 / 76

30 Chapter 2 Installing Device Manager software
214392-A
1 Use the
uname -a
command to determine the version of SunOS/Solaris that
is installed on your workstation.
Table 1 lists the patch file archive name for each version of Solaris.
2
Create a new working directory and move to that directory by entering:
mkdir /tmp/patch
cd /tmp/patch
3
Download the patch file archive to the working directory and untar the file by
entering:
tar -xvf jre131_solxx_patchBundle.tar
where:
xx
is 56, 57, or 58
4
Run the localcheck Perl script included in the patch bundle to determine if the
JRE 1.3.1 patches are applied by entering:
perl localcheck
If the script reports that all patches are up to date, you do not need to install the
patches. Proceed to the next section,
“Installing the JRE in a SunOS/Solaris
environment” on page 31 .
5
If the script indicates that patches are required for your system, you should
run the install script pinst. Make the install script file executable by entering:
chmod a+x pinst
Table 1 Solaris patch files
SunOS/Solaris version Patch file name
5.6/2.6 jre131_sol56_patchBundle.tar
5.7/2.7 jre131_sol57_patchBundle.tar
5.8/2.8 jre131_sol58_patchBundle.tar
Note:
Perl must be installed on the system and it must be included in the execution path
for this script to work.