Nortel AS-1200-ABG-EXT Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 28

Nortel AS-1200-ABG-EXT Скачать руководство пользователя страница 22

March 16, 2004

22

Step 4: Mounting the Nortel Networks WLAN - Access Points

Note:

The Nortel Networks WLAN - Access Point threaded holes have precision-depth threads.

Do not overtighten the screws, or the bracket will not fit under the screw heads.

Figure -

Assembling the Mounting Screws and Spring Washers to the Nortel Networks WLAN - Access Point

•

Copy the MAC address(es) from the label(s) on the Nortel Networks WLAN - Access Point onto
the corresponding location on the map. MAC addresses have the format 000B85xxxxxx.

•

You have already attached the flush-mount bracket to the wall in

Step 3: Preparing Mounting

Locations

.

•

Slide the screws into the keyhole slots on the mounting bracket as shown in the following
figure.

Note:

Make sure the side of the Nortel Networks WLAN - Access Point with the door is facing

away from the wall. This ensures that the correct antenna is facing the building, and makes
future upgrades easier.

«
...
20
21
22
23
24
...
»

Содержание AS-1200-ABG-EXT





























Отзывы:

Нет отзывов