March 16, 2004
20
Step 4: Mounting the Nortel Networks WLAN - Access Points
Projection Wall Mount
Projection Wall Mount
When you are mounting the Nortel Networks WLAN - Access Point out from a wall (flat sides along the
wall or hallway), use an optional separately-orderable factory-orderable projection-mount L-bracket.
•
Before proceeding, gently screw the two factory-supplied screws and spring washers into the
bottom of the Nortel Networks WLAN - Access Point. Make sure the spring washers have their
convex (high center sections) pointing toward the screw heads.
Note:
The Nortel Networks WLAN - Access Point threaded holes have precision-depth threads.
Do not overtighten the screws, or the bracket will not fit under the screw heads.
Figure -
Assembling the Mounting Screws and Spring Washers to the Nortel Networks WLAN - Access Point
•
Copy the MAC address(es) from the label(s) on the Nortel Networks WLAN - Access Point onto
the corresponding location on the map. MAC addresses have the format 000B85xxxxxx.
•
You have already attached the projection-mount L-bracket to the wall in
Step 3: Preparing
Mounting Locations
.
•
Slide the screws into the keyhole slots on the mounting bracket as shown in the following
figure.
