Nortel AN Series Скачать руководство пользователя страница 63

Страница: 63 / 142

Configuring Netboot Services with Site Manager

308614-14.20 Rev 00

3-9

Configuring a Netboot or Directed Netboot Interface

You can use Site Manager to configure a Netboot or Directed Netboot interface.

Site Manager Procedure

You do this

System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

Global Protocols

The Global Protocols menu opens.

3. Choose

Net Boot

The Net Boot menu opens.

4. Choose

Interfaces

The Netboot Interfaces window opens.

5. In the scroll box, choose the interface you

want to configure.

The window shows the parameter values
for that interface.

6. Set the following parameters:

•

Connector IP Address

•

Connector Subnet Mask

•

Connector Next Hop

•

Connector Protocol Mask

•

Connector State

Click on

Help

or refer to the parameter

descriptions beginning on page A-4.

7. Click on

Apply

, then click on

Done

You return to the Configuration Manager
window.

Note:

If you configure more than one interface to Netboot, the first interface to

receive a reply from the BootP server will complete the Netboot process.

Содержание AN Series















































































































































Результаты поиска

Содержание AN Series

Отзывы:

Nortel AN Series, Руководство по настройке, Страница: 63 / 142

Результаты поиска

Содержание AN Series

Отзывы: