Nortek Reznor 120, Руководство по установке и обслуживанию

Страница: 4 / 68

1. Installation Requirements.
1.1 Compliance notices
T he Oil Fired Cabinet Heater range detailed herewith are
manufactured within a strictly controlled quality
environment within the parameters of ISO 9001.
These instructions are only valid if the following country code
is on the appliance GB. IE. If this code is not present on the
appliance, it is necessary to refer to the technical instructions
which will provide the necessary information concerning the
modifi cation of then appliance to the conditions of use for the
country.
The Oil Fired Cabinet Heater range have been tested and
assessed for compliance with the following European
Directives.
Machinery Directive: (2006/42/EC)
Low Voltage Directive: (2006/95/EC)
Electromagnetic Compatibility Directive: (2004/108/EC)
Product Liability Directive: (85/374/EEC)
The manufacturer has taken reasonable and practical steps to
ensure that all
Oil Fired Cabinet Heaters are safe and without
risk when properly used. These heaters should therefore
only be used in the manner and purpose for which they
were intended, and in accordance with the recommendations
detailed herewith.
The Oil Fired Cabinet Heater range has been designed,
manufactured, assembled, inspected, and tested, with safety
and quality in mind, there are certain basic precautions which
the installer and user should be aware of, and they are
strongly advised to read the appropriate sections of the
information pack accompanying the heater, prior to
installation or use.
The manufacturer supports all new products being supplied
to their customers with a comprehensive information pack;
this clearly defi nes mandatory instructions for the safe
installation, use, and maintenance, of the appliance(s).
Where proprietary items are incorporated into any Oil Fired
Cabinet Heaters, detailed information and instructions are also
provided as part of the information pack.
It is the responsibility of the installer, owner, user, or hirer of
Oil Fired Cabinet Heaters to ensure that they are familiar with
the appropriate information/manuals supplied by the
manufacturer and the safety instructions. In addition,
operators must be suitably trained in the use of the appliance
so as to ensure its continued safe and effi
cient use.
The manufacturer has a commitment to continuous
improvement and therefore reserve the right to amend or
change the specifi cation of Cabinet Heaters subject to
compliance with the appropriate European, national and local
regulations
Contained within the text of the manual, the words ‘Caution’
and ‘Warning’ are used to highlight certain points.
Caution is used when failure to follow or
implement the instruction(s) can lead to
premature failure or damage to the heater or its
component parts.
Warning is used when failure to heed or
implement the instruction(s) can lead to not only
component damage, but also to a hazardous
situation being created where there is a risk of personal
injury.
The Oil Fired Cabinet Heater range conform to the following
harmonised standards:
BS EN 292 -1
Safety of Machinery - Basic Concepts, General Principles for
Design Basic terminology, methodology BS EN 292-2
BS EN 292 -2
Safety of Machinery - Basic Concepts, General Principles for
Design Technical Principles and Specifi cations
BS EN 60204-1
Safety of Machinery - Electrical Equipment for Machines
Specifi cation for General Requirements
BS EN 60335-1
Safety of Household and Similar Electrical Appliances General
Requirements
BS EN 55014
Limits and methods of measurement of radio disturbance
characteristics of electrical motor-operated and thermal
appliances for household and similar purposes, electrical tools
and similar electric apparatus
BS EN 50165
Electrical Equipment of non-electric heating appliances for
household and similar purposes, safety requirements
1.2 Certifi cates of conformity
Certifi cates of conformity are available from the manufacturer,
address details are shown on the back page.