Reznor, PVE, Installation Manual EN 2019-11, D301113 iss D Page 5
• Ferrous materials
• Aluminium and copper
• Electrical wiring
• Seals and insulating materials
• Plastic materials
• Electronic cards
Compliance notices
The heater range detailed herewith are
manufactured within a strictly controlled
quality environment within the parameters of
ISO 9001.
These instructions are only valid if the
following country code is on the appliance GB.
IE. If this code is not present on the appliance,
it is necessary to refer to the technical
instructions which will provide the necessary
information concerning the modification of
then appliance to the conditions of use for the
country.
The manufacturer has taken reasonable and
practical steps to ensure that all heaters are
safe and without risk when properly used.
These heaters should therefore only be used
in the manner and purpose for which they
were intended, and in accordance with the
recommendations detailed herewith.
The manufacturer supports all new products
being supplied to their customers with a
comprehensive information pack; this clearly
defines mandatory instructions for the safe
installation, use, and maintenance, of the
appliance(s).
Where proprietary items are incorporated
into any of the heaters, detailed information
and instructions are also provided as part of
the information pack. It is the responsibility
of the installer, owner, user, or hirer of the
heater to ensure that they are familiar with the
appropriate information/manuals supplied by
the manufacturer and the safety instructions.
In addition, operators must be suitably trained
in the use of the appliance so as to ensure its
continued safe and efficient use.
The manufacturer has a commitment to
continuous improvement and therefore reserve
the right to amend or change the specification.
The heater range conforms to the
following standards:
EN 1020
Requirements for non domestic gas fired
forced convection air heaters for space heating
incorporating a fan to assist transportation of
combustion air and/ or combustion products.
EN - ISO 12100-1 & EN - ISO12100-2
Safety of Machinery - Basic Concepts, General
Principles for Design Part 1 & Part 2
EN 60204 - Part 1
Safety of Machinery - Electrical Equipment for
Machines Specification for General
Requirements
EN 60335 - Part 1
Safety of Household and Similar Electrical
Appliances General Requirements
EN 55014
Limits and methods of measurement of
radio disturbance characteristics of electrical
motor-operated and thermal appliances for
household and similar purposes, electrical tools
and similar electric apparatus
EN 50165
Electrical Equipment of non-electric heating
appliances for household and similar purposes,
safety requirements
The PVE range of gas unit heaters meet with
the governments criteria in respect of the
Enhanced
The PVE heaters detailed here are
manufactured for heating within a strictly
controlled environment within the parameters
of ISO9001.
These instructions are only valid for
applications designed to operate in Europe
