Doc No. 702105 Page 11 of 16
7. Parts Replacement cont.
7.2.2
Remove the 2 screws (
B
) retaining the top
element plate ends.
7.2.3
Remove the 3 screws (
C
) retaining the top
rail of the element assembly.
7.2.4
The element assembly can now be tilted
forward slightly and lifted from the 3 retaining tab
slots (
D
). See diagram 8.
7.2.5
The wiring to the element assembly can
now be accessed at the rear of panel (
E
), and
disconnected after first noting the cable
positions.
D
E
F
Diagram 8
7.2.6
Finally disconnect the two female spade
connectors from the overheat thermostat (
F
).
The element assembly can now be withdrawn
from the air curtain.
7.2.7
Refitting a new element assembly is the reverse
of the above procedure.
