Copyright © 2016 Nortek Security & Control LLC
4
TROUBLESHOOTING
Problem
Resolution
When adding the WI15VZ-1 to a network,
the Status LED blinks Green then goes
back to Red
The WI15VZ-1 did not get the signal from
Hub. You may need to add a Z-Wave
Repeater between the Hub and WI15VZ-1
or move the Hub closer to the WI15VZ-1
The WI15VZ-1 shows up as a Binary
Switch
Your Hub software needs to be updated
to support the Irrigation Command Class
Green LED is illuminated but WI15VZ-1
does not appear in my Z-Wave hub
application or is not responding to the
Z-Wave Hub
WI15VZ-1 is not properly added to your
Z-Wave network. Remove or Reset the
unit as described under “To Reset Unit” or
“Removing from a Network”
Cannot create a schedule in the Z-Wave
Hub
Contact your Z-Wave Hub manufacturer
to determine if Schedules are supported
The Status LED is not illuminated
Check all power connections. Confi rm
that the provided AC adapter is being
used and not plugged into a switched
outlet. Replace AC adapter if necessary.
The Status LED is blinking Red / Orange
Confi rm that the provided AC adapter
is being used. Replace AC adapter if
necessary.
The Status LED is blinking Red
Check all wiring to controlled sprinkler
valves. Repair as needed.
Z-WAVE COMMAND CLASSES
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_BINARY_SWITCH
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_ASSOCIATION_GRP-INFO
COMMAND_CLASS_BASIC
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURING_SPECIFIC
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_IRRIGATION
COMMAND_CLASS_FIRMWARE_UPDATE_MD
COMMAND_CLASS_NOTIFICATION
COMMAND_CLASS_SCHEDULE
SPECIFICATIONS
Power:
Input: 100-240 VAC, 50 - 60 Hz
Output: 18 VDC at 1A
Signal (Frequency):
908.42 MHz/916 MHz
Range:
130 feet line of sight
Valves Supported:
15 plus 1 Master Valve Residential 24 VAC
Operating Temperature:
0-120
°
F (-20 - 50
°
C )
Humidity
5% to 95% Relative Humidity (Non Condensing)
NOTICES
Z-Wave
®
and Z-Wave Plus
®
are registered trademarks of Sigma Designs and its subsidiaries in the
United States and other countries.
WARRANTY
What is Covered?
Nortek Security & Control (“NS&C”) warrants to consumers who purchase this product for personal, family
or household purposes new from NS&C directly or from an authorized NS&C dealer, that the product will
be free from defects in materials and workmanship for a period of (1) year from the date of purchase. This
warranty only applies if the product is installed at a residence in the 50 United States or District of Columbia,
and only at the site of the original installation. It is not transferable. This warranty is not extended to resellers.
If a defect exists, NS&C will have you ship the defective part or product to us and we will, at our option, either
repair or replace it. This warranty does
not
cover the cost of labor to remove a defective part or product or to
reinstall any repaired or replacement part.
This warranty does
not
cover defects or damages caused by improper handling, maintenance, storage,
installation, removal or re-installation, misuse, non-factory authorized modifi cation or alteration, use of
incompatible accessories, electrical power problems or surges, impact by foreign objects, accident, fi re, acts
of God, normal wear and tear or shipping damage other than a shipment from NS&C. Note that all NS&C
products are designed to be installed, removed and serviced by trained individuals or professionals.
Keep your original sales receipt as it will be required to obtain warranty service.
This warranty shall not be extended or restarted upon receipt of any repaired or replacement part or product
under this warranty. No person is authorized to extend or otherwise modify this warranty.
How do I Obtain Warranty Service?
To obtain warranty service, email our Returns Department at [email protected]. Include your name,
address, telephone number, the model number of your product, a copy of your original sales receipt, and
a description of the problem. Unless we need to discuss the situation further with you, you will be emailed
a Return Authorization Number and shipping instructions. If we need to discuss the situation further with
you, we will call or email you. NS&C may require troubleshooting on installed product before a Return
Authorization Number is issued. Anything shipped to us without a Return Authorization Number will be
automatically returned unopened. You are responsible for the charges for shipment to us, unless you are
a California resident.
Limitations
THE DURATION OF ANY IMPLIED WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXCEED THE WARRANTY PERIOD PROVIDED HEREIN.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you.
NS&C SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
BREACH OF ANY WRITTEN OR IMPLIED WARRANTY.
Some states do not allow the exclusion of limitation or consequential damages, so the above limitation or
exclusion may not apply to vary from state to state.
This warranty gives you specifi c legal rights, and you may also have other legal rights which vary from State
to State.
FCC & IC Notice
We, Nortek Security & Control, LLC of 1950 Camino Vida Roble STE 150,
Carlsbad, CA 92008, declare under our sole responsibility that the device,
WI15VZ-1 complies with Part 15 of the FCC rules. This device complies with
Part 15 of the FCC Rules and Industry Canada license exempt standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference received that
may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician to help.
WARNING:
Changes or modifi cations not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
IMPORTANT !!!
Radio controls provide a reliable communications link and fi ll an important need in portable wireless signaling.
However, there are some limitations which must be observed.
• For U.S. installations only: The radios are required to comply with FCC Rules and Regulations
as Part 15 devices. As such, they have limited transmitter power and therefore limited range.
• A receiver cannot respond to more than one transmitted signal at a time and may be blocked
by radio signals that occur on or near their operating frequencies, regardless of code settings.
• Infrequently used radio links should be tested regularly to protect against undetected interference
or fault.
• A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale
distributor or dealer, and these facts should be communicated to the ultimate users.
10009201 AX1
