Norstar Modular ICS 5.0 Companion, Руководство по установке

Страница: 94 / 139

88 / Registering individual portables
Modular ICS 5.0 Companion Installer Guide P0941568 01
Before you begin measuring directed RSSI
Use the Companion Provisioning Record to find and note the
following:
• the five-digit radio ID of the base station you want to
measure, by mapping the base station location to the TCM
port. The first four digits indicate the TCM port to which
the base station is connected. The last digit indicates the
number of the radio on the base station. For example, the
number 03122 identifies radio 2 on the base station
connected to TCM port 0312.
• the radio IDs of all other base stations in the same location.
Measuring directed RSSI using your portable
1. Perform an undirected Receive Signal Strength Indicator
by following steps 1 to 3 in To measure undirected RSSI
on page 81. To direct the Receive Signal Strength
Indicator to the other radio of the base station, move out of
range until hand-off occurs before moving on to step 2.
2. Press
L
. Wait for dial tone.
3. Press
* 8 9 9
.
4. Enter the five-digit ID code for the base station radio you
want to measure. The display shows this ID followed by
the signal strength, for example
03121 - 67
. If you have
not established a connection with the desired base station
radio, you hear a tone when you hold the portable to your
ear.
5. Read your measurement. The system drops the link when
you move out of range of your base station (no hand-off).
6. To end the connection, press
r
, or close the flap.