Norstar Modular ICS 5.0 Companion, Руководство по установке

Страница: 74 / 139

68 / Programming
Modular ICS 5.0 Companion Installer Guide P0941568 01
3. Press
­
. The display reads
Key 1:_
.
4. Enter the 8 digit password number for Key 1. Use
BKSP
to
make corrections. The display reads
Key 2:_
.
5. Enter the eight-digit password number for Key 2. Proceed
as above until you have finished entering Key 3. The
display reads
Entry successful
.
6. Repeat steps 3 through 5 for the other key.
7. Press
Ð
until the display reads
Software keys
or
®
to exit.
The system automatically starts reevaluation and the
display shows
Re-Eval in prog.
,
Re-Eval complete
,
System online
, as the reevaluation runs its course.
Note: If the UTAM Activation Code entry is unsuccessful, the
display shows
Invalid code
. If this happens, reenter
the code or call Nortel Customer Response Center at
1-800-321-2649 for assistance.
Step 5: Configure base stations and portables
Once you have entered the required keys to activate the base
stations and to obtain enough portable credits, you can proceed
with programming these items with the MICS-XC system.
Configure your base stations
Companion base stations are recognized by the MICS-XC
system once the UTAM activation keys have been entered. To
verify whether or not the base stations have been properly
recognized, see Radio data on page 59 for information on the
re-eval process.