Norsonic Nor848, Инструкция по эксплуатации

Страница: 23 / 32

20 Norsonic Nor848
Instruction Manual
Making Scenes
New Scene
When you play a recorded file, you may select a part of it as
a new scene. Mark the part you want to keep as a scene in
the time-line and press the “New Scene” button. The infor-
mation shown to the right will be presented. Press “Capture”
to create the scene. During the creation of the scene, you
may move the cursor or readjust parameters like frequency
range, level range etc and this information is recorded as
part of the scene. If you don’t want this possibility, press the
optional “Use current settings for whole scene”.
When the scene is captured, you are asked if you want
to export the scene and in which format. You may close
the menu and eventually export the scene at a later time.
Available formats are:
Video
A movie in MP4 format with sound is exported.
Sound
A WAV-file with the sound in the virtual microphone is gener-
ated. The quality of the sound file corresponds to CD-quality
with 16 bit and a sampling frequency of 44.1 kHz. The sound
is captured in the position for the cursor and may be used
for listening or further analysis.
RAW-file – sqh-file
This corresponds to the original file format for the acoustic
camera software, and may be used to make a file from a
small section of a previous recording. In this way a smaller
file with the interesting part of a longer recording may be
generated. All functions like colouring and frequency analy-
sis are available. The file will be marked xxx.sqh.
Duration information based
on the actual selection
Alternative formats for the export
Start export of the current scene. Delete the scene
Rename the scene.