Norsjö Carrier 4-Stroke
Model Post Petrol Short and Long version
Adjusting the headlamp
Adjustment of the headlamp is important so that it does not dazzle oncoming traffi c.
Adjustment can be made by loosening the screws which hold the headlamp in place.
Changing a bulb
When changing a bulb in the headlamp it is important not to touch the bulb with
your fi ngers.
If any fat from your fi ngers adheres to the bulb, it will evaporate because of the heat and
will be deposited on the refl ector which will eventually become dull.
Do not touch the refl ector’s surface as it will become soiled and will therefore affect the
luminous effi ciency.
Cleaning and rust protection
Keep your moped clean by washing it regularly with water and car shampoo.
As an alternative to car shampoo, 5-10 cl of liquid detergent to 10 L of water may also
be used. Rinse the whole moped down with lukewarm water until the dirt has softened.
Wash the moped with a sponge and then rinse off to remove the dirt.
A degreasing agent may be used for extremely dirty surfaces.
Regular use of car wax will protect the moped’s paintwork against oxidation, dirt and
discolouration at the same time as a waxed surface is easier to keep clean. All types
of surfaces can be protected by waxing. As well as the painted surfaces, aluminium,
chrome and zinc surfaces can also be protected. It is a particular benefi t to wax just
before the winter period starts.
Use the same type of wax intended for use on cars. In particular, it is recommended that
a modern polymer wax is used which is easy to apply at the same time as it provides a
very hard, shiny and durable surface.
High-pressure jet cleaning must not be used as its powerful spray can
cause damage by entering the carburettor, electrical equipment,
wheel hub and other parts which are sensitive to water.
Bird droppings contain chemicals which affect and discolour the paint very quickly.
Remove bird droppings immediately!
Page
23 of 30
Loosen the screws
on both sides.
