14
OM_AL_v04
5.
Installation
For Installation details of the Norma Autoloader please refer to the Quick
Installation Guide or follow the procedure through our installation video.
Please contact your local distributor for further information.
Installation must be carried out by a trained service engineer.
The procedure consists of the following:
-
install modified instrument feet on Icon-5.
-
install Icon-5 and Autoloader on the
normaboard
baseplate.
-
connect protective grounding between devices.
-
connect Autoloader power supply (before connecting USB cable).
-
connect the two devices with a USB cable.
-
install operating software to support Autoloader operation.
-
verify and calibrate vial positions.
Adjustments
There are no user serviceable parts inside this equipment. Adjustment of the
Autoloader should only be performed by qualified service personnel.
