2
V
1
2
3
Ø
V
5
4
3
only in ca
s
e of in
s
tallation
with feed pump
TYPE OF FITTIN
G
S
NPT
tapered
AN
S
I/A
S
ME B1.20.1
U
S
E ONLY
S
EALIN
G
TAPE A
S
A
S
EALANT
DO NOT U
S
E
LIQUID
S
EALANT
S
OR
G
LUE
S
DO NOT U
S
E
G
REEN
PA
S
TE
DO NOT U
S
E
HEMP
IN
IN
OUT
OUT
IN
OUT
IN
IN
OUT
VV
IN
OUT
IN
OUT
Modes for presentation of inlet and outlet directions (arrows) in different filter
housings models
INSTALLATION LAY OUT
- Use only sealing tape as a sealant for the connections.
- The installation of a By-pass is recommended (see Fig. C).
- Remove the protective plastic wrap from the cartridge provided before the use.
- Refer to Fig. D for step-by-step instructions for the insertion of a (new) cartridge.
Start Up
- Keep the housing package with sticker (Data Plate) to identify the product.
- Ensure that the sealing is tight and secure.
- After the installation, run the tap and let the water flow for at least 5 minutes before use.
The initial quality of the water will not be optimal unless
the tap runs for at least 5 minutes before use.
A
B
C
Ø
V min
V max
1/4”
0.8 gal (3 l)
1.32 gal (5 l)
1/2”
3.17 gal (12 l)
4.76 gal (18 l)
3/4”
5.28 gal (20 l)
6.60 gal (25 l)
1”
9.25 gal (35 l) 10.57 gal (40 l)
1”1/2 21.13 gal (80 l) 22.45 gal (85 l)
Make sure that there are no water leaks from the
product, and especially control the tightening between
the housing head and the housing sump. In case of
leakage, open the housing, remove the o-ring from the
bowl, place a new o-ring and apply lubricant.