manualshive.com logo in svg

Noritz NRC661-DV, Руководство по обслуживанию, Страница: 59 / 78

Поделиться
Скачать
Noritz NRC661-DV Скачать руководство пользователя страница 59

Displaying Maintenance Monitors

Display Procedure

Press and hold the Mode Button for more than 2 seconds.

This can be done regardless if the unit is burning or not.

Display Window

Remote Controller

Press and hold both the up [▲] and down [▼] Setting

Buttons simultaneously for more than 2 seconds.

This can be done regardless of whether the power

has been turned on or the unit is operating.

Press and hold the Mode Button for more than 2 seconds,

or leave it alone for more than 10 minutes.

Press and hold both the up [▲] and down [▼] Setting

Buttons simultaneously for more than 2 seconds,

or leave it alone for more than 10 minutes.

1. The maintenance monitor data No. will appear on the display for 2 seconds, and then the data will appear.

2. In order to switch to other maintenance monitor data, press either the up or down button once. The data No.

    will then reappear, then different data No. can be selected using the up and down buttons.

    When the maintenance monitor data No. is changed, the data No. will be displayed for 2 seconds, after

    which the data will appear.

     note) With the Remote Controller in maintenance mode, the hot water set temperature and flow meter alarm

              cannot be adjusted.

Indications

Returning to Normal Mode

Setting Button

Flow Meter Alarm Set Button

Power On/Off Button

●Display Window

●Remote Controller

59

Содержание NRC661-DV















































































Отзывы:

Нет отзывов