1
Optional Remote Controller (RC-7651M)
For setting the hot
water temperature,
the flow meter alarm,
and other settings.
Power On/Off Button
For turning electrical
power to the unit on
and off.
Flow Meter Alarm Set Button
For setting the flow
meter alarm.
(
p.16 - 17)
Setting Buttons
* Before use, remove the protective sheet from the remote controller surface.
Temperature Setting
(Ex.:110°F)
Flow Meter Setting
The display will flash
after hitting the flow
meter alarm set button.
(
p.16)
Error Code
When this indicator is lit,
the hot water temperature
can be set.
(
p.14)
If you want to change the temperature of supplied hot water frequently or you want to set
the amount of hot water to accumulate the hot water, this remote controller is useful.
A number will flash if
a failure occurs.
(
p.25)
Priority Indicator
Burner On Indicator
When burning, the
indicator is lit.
(
p.14 and 17)
Note: Initial factory setting is set to display in °F and gallons.
To adjust the display to °C and liters, refer to the Installation Manual.
How to Use (Using the optional remote controller)
Remote Controller
What is actually displayed depends on how the water heater is set.
