17
An alarm will sound for ten
seconds when the flow
reaches the set level.
The water will continue to run unless
it is manually turned off.
If the flow meter alarm is being used to indicate when a tub is full:
• If any hot water is being used besides what is going into the tub, the alarm will sound
before the tub is full.
•
If there was water in the tub before the fill began, or if the water is not shut off manually
when the alarm sounds, the tub may overflow.
•
If there was water in the tub before the fill began, the temperature in the tub after it is full
may be different from the temperature setting.
* Initial factory setting: 110°F or 40°C (104°F)
Water Temperature
The temperatures settings below are only examples. The
temperature setting necessary will depend on the usage,
the length of piping and the time of year.
(
°C (°F) :
)
Warmer
Hot
Warm
37 38 39 40 41 42 43 44 45 46 47 48
(99) (100) (102) (104) (106) (108) (109) (111) (113) (115) (117) (118)
100
105 110 115 120
Warmer
Hot
Warm
The temperatures settings below are only examples. The
temperature setting necessary will depend on the usage,
the length of piping and the time of year.
(
°F :
)
