10 Declaration of conformity
Norgren GmbH
Postfach 15 60
D-70705 Fellbach
Stuttgarter Str. 120
D-70736 Fellbach
Tel: + 49 711 5209-0
Fax: +49 711 5209-614
www.imi-precision.com
EC Declaration of conformity
in accordance with the
Machinery Directive 2006/42/EG
Component
3/2-way safety valves
electro-pneumatic actuated
Series
SCVA08xxxxxxxxxx / SCVA10xxxxxxxxxx
SCVA20xxxxxxxxxx / SCVA32xxxxxxxxxx
The manufacturer hereby declares that the mentioned product conforms to all
relevant provisions of the above-stated directive and with the additional applied
standards (stated below) - including those amendments valid at the time this
declaration was signed.
The following harmonised standards were applied:
EN ISO 12100:2010: General principles for design - risk assessment and
risk reduction
EN ISO 13849-1:2016: Safety of machinery - Safety related parts of control
system - Part 1: General principles for design
EN ISO 4414:2010:
Pneumatic fluid power - General rules and safety
requirements for systems and their components
Notified body
Deutsche Gesetzliche Unfallversicherung [German Social Accident Insurance]
Kreuzstraße 45
40210 Düsseldorf / Certificate no. HSM 12034 dated 27.02.2015
Fellbach, Germany, July 2017
Norgren GmbH
Norgren GmbH
ppa.
i. A.
Dr. Maik Fiedler
Viktor Knoll
Engineering Director
Corporate representative
Europe & IA
Machinery directive
-ORIGINAL-
Geschäftsführer:
Vorsitzender des
Dr. Klaus Heldmann
Aufsichtsrats:
Christian Keil
Andrew Bruce
Thomas Hey
Sitz der Gesellschaft:
46519 Alpen
Handelsregister:
47533 Kleve, HR B 7257
Steuer-Nr.: 5119/5744/0345
USt.- IdNr.: DE191308280
Bankverbindung:
Bank of America N.A.
IBAN: DE68 5001 0900 0020 6340 26
SWIFT Code: BOFADEFX
7503618000000006
019
Incorporating
SCVA
02/22
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifi cations given in this document. © 2014 Norgren Ltd