background image

Operator’s manual

Axiona - Prodigia

7

GENERAL SAFETY RULES

It is essential to follow the instructions in this manual to ensure the 

safety of persons operating or in the vicinity of the machine.

1. Contact with oil

At the time of oil changes or when  working on any components which 

may retain hydraulic pressure, ALWAYS wear adequate safety equipment

Body  

Protection

Gloves

Face 

Visor

-In the event of contact with the skin: 

 

If a high pressure jet of oil is applied to the skin there is a danger of the oil penetrating 

 

the surface. The injured person should be taken to hospital even if no wound is apparent. 

 

Remove all contaminated clothing. Wash the suspected area immediately with plenty of soap 

 

and water.

-In the event of contact with the eyes:
 

Wash immediately with plenty of water. Hold the eyelids apart for at least 15 minutes.

-Ingestion: 

 

Risk of vomiting and diarrhoea. Do not make the person drink to avoid the risk of inhalation by 

the respiratory tracts. Do not drink water.
-Aspiration: 

 

If there is a suspicion that the person may have inhaled oil into the lungs (when vomiting for 

instance), take them to hospital immediately.

In all cases seek immediate medical attention

Содержание AXIONA 45


































Отзывы: