Nordson Ultimus V Скачать руководство пользователя | Manualshive

Страница: 23 / 86

background image

Setting Operator Lockout Parameters

• From the Main screen, Press the F3 (Menu) key to display the

Main Menu Screen.

• Use the Up / Down (8 / 2) keys to highlight OPERATOR

LOCKOUT, then press the Enter key.

• The Password screen will be displayed.

NOTE:

The Ultimus V dispenser is shipped with the password

preset to 0000.
Enter the 4-digit security code, then press the Enter key. An incorrect password will clear the digits and redisplay
the dashes.

General Operator Lockout Procedures

The following items can be locked out to prevent unauthorized adjustment:
•  Time Setting
•  Pressure Setting
•  Vacuum Setting
•  Memory Setting
•  Deposit Counter

•  Dispense Mode
•  Auto Increment Mode
•  Auto Increment Reset
•  Alarm Reset
•  Main Menu

•  Pressure Units Menu
•  Vacuum Units Menu
•  Language Menu
•  Set Comm Menu
•  Alarms Menu

NOTES:

• If a square is checked, it means that item has been locked out and the user cannot change or select that item.
• To lock out an item, press the Up / Down (8 / 2) keys to highlight the desired item. Press the Enter key to toggle

the lockout setting on and off.

• Press the F3 (Next) key to load the next Operator Lockout screen. Press the F1 (Previous) key to load the previous

Operator Lockout screen. When finished, press the F2 (Save) key to save the settings and return to the Main Menu
screen.

• It is also possible to lock out the entire Main Menu so that when the user presses the Menu Function key on the

Main screen, the Password screen appears first. When the correct password is entered, the Main Menu screen
will load.

• When the Time Setting parameter is locked out, the deposit time duration cannot be adjusted and the Teach

dispense mode will also be locked out.

• When the F1 (Dispense Mode) key is locked out, the Ultimus will remain in the current Dispense Mode (Timed or

Steady) and cannot be changed.

• Locking out the Set Clock item will also lock out the Set Date item.
• The user can be locked out from resetting the dispensing parameters back to the starting address before the

Ultimus V reaches the ending address and the final trigger value by checking the Auto Increment Reset option.

• Resetting the Alarms can be locked out. The user will be asked for the password when a latched alarm is being

reset.

Ultimus V High Precision Fluid Dispenser

23

www.nordsonefd.com [email protected]

800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.

«
...
21
22
23
24
25
...
»

Содержание Ultimus V























































































Отзывы:

Нет отзывов

Похожие инструкции для Ultimus V

Бренд: Silver Style Страницы: 36

Бренд: WaterLogic Страницы: 19

Бренд: Ultra Страницы: 52

Waterways Estetica SAET310BLES

Бренд: Oasis Страницы: 9

DELTA III PRE-MIX

Бренд: lancer Страницы: 20

Crathco G-Cool Single C-1S

Бренд: Grindmaster Страницы: 4

Hybrid Ultra 7 Series

Бренд: WHITE BUFFALO NATION Страницы: 24

Бренд: ClearStream Страницы: 12

Бренд: U-Line Страницы: 2

Бренд: U-Line Страницы: 2

Бренд: U-Line Страницы: 5

Бренд: U-Line Страницы: 9

Бренд: U-Line Страницы: 6

Бренд: TPS Страницы: 65

Бренд: La Sommeliere Страницы: 26

Бренд: Vitality Страницы: 24

HAC8EECBL 1E Series

Бренд: Halsey Taylor Страницы: 6

HAC8FBLRQ 1F Series

Бренд: Halsey Taylor Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды