Nordson Trilogy GP Скачать руководство пользователя

Страница: 9 / 21

Trilogy

GP Air Spray and LVLP Gravity Fed Manual Spray Guns

1601056-05

Description

The Trilogy Air Spray and Low-Volume Low-Pressure (LVLP) Siphon Fed Manual Spray

Guns are compressed-air operated low-pressure manual spray guns for the application of

sprayable fluids at air pressures of 2.0−2.5 bar (28−35 psi).
The guns are differentiated by the type of air cap used. A gun may be converted from Air

Spray to LVLP (low volume, low pressure) or vice-versa simply by changing the air cap.

The Air Spray guns are used for fine atomization and clear coats. The LVLP guns are

used for high transfer efficiency and base coats.

The guns can be supplied with paint from an optional 1000 ml siphon pot or by hose from

a low pressure pump or pressure pot. The siphon pot must be ordered separately.

Refer to Options for nozzles, air caps, needles, and nozzle kits in different sizes, and air

compliance caps and gauge kits to test air flow and ensure compliance with regulations.

Refer to Compliance Kit Installation and Use for instructions.

Also available are adapters that install on the gravity cup fitting for use with the

disposable paint cups of the 3M

™

PPS

™

(Paint Preparation System) or the

HSM SPA-System.

Specifications

Item

Specification

Weight (without siphon cup)

480 grams (1.05 lb)

Maximum Air Pressure

6.0 bar (85 psi)

Recommended Atomizing Air Pressure

2.0−2.5 bar (28−35 psi)

Maximum Material Pressure

6.0 bar (85 psi)

Maximum Material Temperature

Without protective gloves: 40 °C (104 °F)

With protective gloves: 60 °C (140 °F)

Material Flow Rate

260 grams/min with the following:

Nozzle Size: 1.4 mm

Air Pressure: 2.5 bar (35 psi)

Viscosity: 18 sec DIN 4 mm at 20 °C (68 °F)

Fluid Fitting

3/8 NPSM, 3/8 BSPP (metric)

Air Spray Air Consumption

96−228 l/m (3.4−8.0 cfm)

LVLP Air Consumption

102−247 l/m (3.6−8.7 cfm)

Sound Pressure Level (A)

2 bar (28 psi): 76 dB/A

(A) Sound pressure level measurements and specifications are in accordance with

Third regulation to apparatus

safety law DIN 45635 part 1/04.84

Содержание Trilogy GP






















Результаты поиска

Содержание Trilogy GP

Отзывы:

Похожие инструкции для Trilogy GP

Бренды по названию

Популярные бренды

Nordson Trilogy GP, Руководство пользователя по изделию

Результаты поиска

Содержание Trilogy GP

Отзывы:

Похожие инструкции для Trilogy GP

Бренды по названию

Популярные бренды