manualshive.com logo in svg

Nordson Trilogy GP, Руководство пользователя по изделию

Поделиться
Скачать
Nordson Trilogy GP Скачать руководство пользователя страница 11

7

Trilogy

®

 GP Air Spray and LVLP Gravity Fed Manual Spray Guns

© 2021 Nordson Corporation

1601056-05

Atomizing Air Adjustment

See Figure 1 and Figure 2

. Use the atomizing air regulator (3) to adjust atomizing air flow.

• Rotate the regulator to the right (clockwise) to decrease atomizing air.
• Rotate the regulator to the left (counterclockwise) to increase atomizing air.

Material Flow Adjustment

See Figure 1

. The material flow regulator (2) adjusts the material flow rate. 

 

Loosen the lock nut (2a) before adjusting the flow.

• 

Rotate the regulator to the right (clockwise) to decrease material flow.

• 

Rotate the regulator to the left (counter-clockwise) to increase material flow.

Fan Pattern Adjustment

See Figure 1. The fan pattern regulator (4) adjusts the shape of the spray pattern from 

flat to round.

• Rotate the regulator to the right (clockwise) for a round pattern.
• 

Rotate the regulator to the left (counter-clockwise) for a flat pattern.

Air Cap Adjustment

See Figure 2. The position of the atomization air cap and the nozzle determines the 

orientation of the fan pattern.

1. Loosen the air cap retaining ring.
2. Rotate the air cap to the desired position, hold it in position, then tighten the retaining 

ring securely.

Содержание Trilogy GP






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды