background image

15

Trilogy

®

 GP Air Spray and LVLP Gravity Fed Manual Spray Guns

© 2021 Nordson Corporation

1601056-05

Item

Part

Description

Quantity

Note

1600766

Gun, manual, NES, Trilogy GP-AS

1

1600768

Gun, manual, NES, Trilogy LVLP AS

1

1

−−−−−−

•  Retainer, with seal, air cap

1

2

−−−−−−

•  Air cap

1

3

−−−−−−

•  Seal

1

A

4

−−−−−−

•  Nozzle

1

A

5

−−−−−−

• 

Paint pipe ⅜ in., stainless steel, AS, Trilogy NES

1

B, C

6

−−−−−−

•  Connector with seal ring, AS, Trilogy NES

1

A

7

1600856

•  Nut, lock, needle tension, AS, Trilogy NES

1

7a

1600853

•  •  Regulator, air, AC/GP, Trilogy NES

1

8

−−−−−−

•  O-ring, 7 x 1.5

1

9

−−−−−−

•  Axle, trigger

1

10

−−−−−−

•  Screw, trigger

1

B, C

11

1600848

•  Trigger, AC/GP, Trilogy NES

1

C

11

1600845

•  Coupling, air, QC, swivel, US, Trilogy NES

1

C

11

1600844

•  Coupling, air, QC, swivel, EU, Trilogy NES

12

1600846

•  Coupling, air, QC, swivel, Asia, Trilogy NES

1

13

1600852

•  Regulator, fan, AC/GP, Trilogy NES

1

14

−−−−−−

•  Gland, packaging, air valve

1

E

15

−−−−−−

•  Seal, packaging gland, air valve

1

16

−−−−−−

•  Pin, valve, trigger air, Trilogy NES

1

C, D

17

−−−−−−

•  Spring, pressure

1

B, D

18

−−−−−−

•  Screw, retaining, valve, AC/GP, Trilogy NES

2

D

19

−−−−−−

•  O-ring, 4.0 x 1.2 mm, Viton®

2

D

20

−−−−−−

•  Seal

1

D

21

−−−−−−

•  Guide, needle

1

B, C

22

−−−−−−

•  Disc, pressure

1

B, C

23

−−−−−−

•  Spring, pressure

1

C

24

−−−−−−

•  Gland, packing, needle

1

C

25

−−−−−−

•  Needle, 1.0 mm, GP, Trilogy NES

1

C

26

−−−−−−

•  Bolt, distance, with pressure spring

1

C

27

1600851

•  Collar, retaining, QC, Trilogy NES

1

A

28

1600849

•  Nut, lock, quick clip, Trilogy NES

1

C

NOTE:  A.  

Parts included in nozzle kit available in different sizes. Refer to the Options list on page 16. 

B.  Included in 1600860 Kit, seal, AS, Trilogy NES (AS and LVLP seal kit).

C.  Included in 1600861 Kit, repair, AS, Trilogy NES (AS and LVLP repair kit).
D.  Included in 1617888 Kit, pin, Trilogy NES (AS and LVLP pin kit).

E.  Optional, not included with guns. Must be ordered separately.

Содержание Trilogy GP






















Отзывы: