Encore Manual Spray Gun - Trigger Switch Replacement
6
Part 1096694A
E
2009 Nordson Corporation
9. Feed the power supply connector through the top opening in the
bulkhead cover (8).
10. Route the trigger switch header and gun cable connectors through the
bottom opening in the bulkhead cover.
11. Connect the gun cable J2 connector to the power supply J2 connector.
8
Screw Boss
Trigger
Switch
Gun Cable
J3 Display
Connector
Power
Supply
J2 Connector
Gun Cable
J2 Power
Connector
Figure 12
Handle Assembly Steps 8-10
12. See Figure 13. Make sure the outlet powder tube (14) is installed in the
gun body. Align the gun body with the handle and slide them together,
engaging the internal ribs of the gun body with the tabs in the handle.
13. Install the M5 x 10 flat head nylon screw (24) into the gun body to
secure it to the handle.
14
13
Internal Ribs
Handle Tabs
24
Figure 13
Gun Body and Handle Assembly
