Nordson ColorMax Series, Руководство пользователя

Страница: 29 / 44

Operation
4-1
E
2002 Nordson Corporation
All rights reserved
ColorMax
Issued 12/02
P/N 768625C
Section 4
Operation
WARNING: Allow only qualified personnel to perform the
following tasks. Observe and follow the safety instructions in
this document and all other related documentation.
Procedure for cleaning booth and application equipment with Powder
Feed Centre (when present).
The majority of system are sold complete with a Powder Feed Centre. If
a Feed Centre is not present, please ignore the steps where it is
mentioned.
In order to successfully colour change the booth and application system
follow the procedure outlined below.
1. Put a box of powder into the Powder Feed Centre or hopper.
2. Start booth.
3. Put Powder Feed Centre into run mode (where applicable)
4. Ensure the dip legs enter the powder and do not catch on the bag
(where applicable).
5. Put the transfer hoses into the waste holsters at the back of the
Powder Feed Centre (where applicable).
6. Start the Gun Movers (where applicable).
7. Turn on the recycle.
8. Start spraying powder and run production.
9. After approx. 2 minutes of recycled powder being returned back
through the recycle hose move the hose into the sieve holster. (if
applicable).
1. Daily Operation
Start Up Procedure