Pinch Valve Assembly
10
Part 768670A
.
2005 Nordson Corporation
Maintenance
WARNING:
Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
WARNING:
Ensure electrical power and pneumatic connections are
disconnected before carrying out maintenance work
Replacing A Pinch Valve Sleeve
To replace a pinch valve sleeve use the following procedure.
1. Switch off the Pinch Valve Assembly and safely disconnect the electrical
and pneumatic supplies
2. See Fig 4.Using a 19mm wrench disconnect the pinch valve that you
would like to replace the sleeve on by loosening the bolts (1).
CAUTION:
The top valve (2) is bigger than the bottom valve (3)
